Fenix C5 Pro – 2000 Lumen Rechargeable Torch with 480 m Beam & Magnetic Base

Built for work, compact enough to carry

The Fenix C5 Pro is a high-output work flashlight for industrial sites, factory patrols, workshops and serious outdoor use. Its Luminus SFT40 Gen2 LED produces up to 2000 lumens with a peak intensity of 57,600 candela, throwing a tight, focused beam 480 metres. That's nearly five football fields, far enough to inspect a factory yard, scan a perimeter wall or pick out a landmark across a valley.

At 137.4 mm long and 190.3 g with the battery, it's still small enough for a jacket pocket, tool bag or glovebox.

Magnetic base for hands-free light

A strong magnet in the tail lets you stick the C5 Pro to any steel surface: a vehicle bonnet, machinery, an electrical panel, a shutter or a toolbox. Point the light where you need it and keep both hands free for the job.

Five brightness levels, plus Strobe and SOS

*Turbo runtime includes automatic step-down to lower output to manage heat. Figures are from Fenix laboratory testing (ANSI/PLATO FL1) with the ARB-L18-3300 battery at 21±3°C; real-world results vary with conditions and battery.

Use Turbo when you need maximum reach. Medium handles most work and walking, Low is for close-up tasks and power cuts, and Eco runs for nearly three days of continuous light on a single charge. Strobe and SOS sit in a separate Flash mode, so you never land on them by accident.

USB-C charging, no separate charger needed

The included Fenix ARB-L18-3300 (3300mAh 18650) battery charges inside the light through a built-in USB Type-C port, from empty to full in about 2.5 hours on a 5 V / 2 A adapter. Use your phone charger, a power bank, a laptop or a car adapter. A rubber dust plug seals the port when you're not charging.

The light also works while plugged in. When you're away from power, it runs on two CR123A cells as a backup (Turbo is unavailable on CR123A, and High and Strobe cap at 1000 lumens).

Built for Indian conditions: rain, dust and drops

• IP68 rated: fully protected against dust and submersible, so monsoon downpours, dusty sites and accidental dunks are no problem.
• 3.25 mm ultra-thick housing with 1-metre impact resistance takes the knocks of daily work.
• 6061 aerospace-grade aluminium with a Type III hard-anodised finish that resists scratches, corrosion and wear.
• Toughened ultra-clear glass lens with an anti-reflective coating and up to 90% light transmittance.
• Anti-roll, anti-slip body stays put on sloped surfaces and holds firm in wet or gloved hands.

Smart protection built in

• Constant-current circuit keeps brightness steady instead of fading as the battery drains.
• Intelligent overheat protection steps output down at 60°C and restores it once the light cools.
• Reverse polarity protection guards the electronics if the battery is inserted the wrong way.
• 50,000-hour LED lifespan, cool white light at around 6500K.

Who it's for

• Industrial, plant and maintenance teams who need long reach and a magnet to work hands-free.
• Security and patrol staff covering large compounds, warehouses and parking lots at night.
• Mechanics and electricians who want light stuck to a bonnet or panel, aimed exactly where they're working.
• Trekkers, campers and farm owners who need to see far into open ground.
• Gifting: with free engraving, a premium, practical gift for Diwali, birthdays and corporate events.

C5 Pro or C5 V2.0?

Choose the C5 Pro for maximum reach and hands-free work. Choose the C5 V2.0 if you want a slightly lighter everyday light with a dimmer 10-lumen mode for very long runtime.

Free personalised engraving

Every Fenix C5 Pro from LightMen can be laser-engraved free of charge. Add a name or initials. Laser engraving is permanent and won't wear off like printing or stickers, and it turns a great flashlight into a keepsake. Ideal for corporate gifting in bulk.