NEW Fenix FD41 LED Rotary Focus LED Flashlight in India, Zoom/Focus To

New Design - Rotary Focus LED Flashlight

Fenix FD41 LED Flashlight

Announcing the long-awaited release our the brand new Fenix FD41! This 2-in-1 flashlight has the capability of a spotlight mode along with a floodlight with the 360-degree rotary focusing function. This FD41 features a floodlight with a wide beam of 81 degrees and a spotlight that has a beam throw of over 1,115 feet (340 meters). This FD41 is fitted with an optical lens with total reflective coating. Revolving the focusing ring moves the head and the optical lens forward and backward from the LED, thus regulating the focus between spotlight and floodlight. It delivers max output of 900 lumens. The tail switch plus side switch and compatibility with 18650 Li-ion as well as the cold-resistant CR123A batteries makes the FD41 stand out when searching, camping and photographing outdoors.

Fenix FD41 LED Flashlight

 

  • Optimizes Cree XP-L HI LED
  • 360 degree rotary focusing
  • 4 Different Modes Plus Strobe
    • Turbo: 900 Lumens (1 hour 40 min.) 1,115 feet/340 meters
      • Spotlight: 1,115.5 feet/340 meters
      • Floodlight: 154 feet/47 meters
    • High: 350 lumens (3 hours 50 min.)
      • Spotlight: 715 feet/218 meters
      • Floodlight: 98 feet/30 meters
    • Med: 150 Lumens (10 hours 15 min.)
      • Spotlight: 463 feet/141 meters
      • Floodlight: 66 feet/20 meters
    • Low: 10 Lumens (150 hours)
      • Spotlight: 121 feet/37 meters
      • Floodlight: 20 feet/6 meters
    • Strobe: 900 Lumens
  • Tactical Tail Switch
  • Stainless Steel Side Switch
  • Optical Lens With Total Reflective Coating
  • Digitally Regulated Output Maintains Constant Brightness
  • Reverse Polarity Protection to Protect From Improper Battery Insertion
  • Intelligent Overheat Protection
  • Momentary On Function
  • Aircraft-grade Aluminum
  • Premium Type III Hard Anodized Anti-Abrasive Finish
  • High Efficiency Lens with Total Reflective Coating
  • IPX6 Dustproof
  • IPX8 Waterproof: Submersible up to 6.6 feet/2 meters


  • Fenix FD41 LED Flashlight - Focus Beam

     

    Fenix FD41 LED Flashlight - 900 Lumens

    Fenix FD41 LED Flashlight - Flood Light and Spotlight

    Fenix FD41 LED Flashlight CREE

    Fenix FD41 LED Tactical Flashlight

    Fenix FD41 LED Flashlight 18650 Batteries

    Fenix FD41 LED Flashlight Tactical Flashlights

     

    Fenix FD41 LED Flashlight Specifications

    Fenix FD41 LED Flashlight Features

    Fenix FD41 LED Flashlight

    Leave a comment

    Please note, comments must be approved before they are published

    Search

    Just added to your cart:
    Qty:
    Total:
    Subtotal:
    Excl. postage 
    My Bag
    Just added to your wishlist:
    Excl. postage 
    My Wishlist

    DO YOU KNOW THE STANDARDS THAT CERTIFY OUR FENIX TORCHES?

    In simpler terms, like the various other commodities in India and abroad are authenticated, measured and tested in order to maintain their standard quality, torches around the world have their mark too. Fenix being an International brand thats spread across the globe are standardised with the ANSI Mark (American National Standards Institute).

    To have a clearer understanding, here are few examples for various commodities:

    ISI MARK Indian Standards Institute | Products deemed for safe consumers use.

     
    AGMARK AGMARK | Agricultural Product/produce
      
    BIS BIS HALLMARK | Purity of Precious Metals like Gold & Silver jewellery

     

    ANSI ANSI (American National Standards Institute) | ANSI represent more than 270,000 companies, professional societies, trade associations, government agencies, and consumer and labor organizations. ANSI lobbies for over 30 million professionals and covers nearly every industry across the globe

     

    ANSI / NEMA FL-1 Standard

     

    ANSI Standards, Fenix Torches in India   

     

    Fenix Has Implemented the ANSI Standard for measuring performance and quality across our complete product range. ANSI Standards refer to: 

    LIGHT OUTPUT

    RUNTIME 

    BEAM DISTANCE 

    BEAM INTENSITY

    IMPACT RESISTANCE

    WATER RESISTANCE

    ALL ABOUT ANSI:

    1. A brief introduction of ANSI/NEMA FL1-2009 Standard

    2. Why was it created?

    3. Who approved the standard?

    4. What does it mean to Consumers and Distributors?

    5. The descriptions of the contents

    • Light Output
    • Runtime
    • Beam Distance 
    • Beam Intensity 
    •  Impact Resistance
    • Water Resistance

      6. How will Fenix use it?

      • In line with the ANSI Standard, 
        • Fenix tests the output and runtime.
        • Fenix tests the beam distance.
        • Fenix tests the peak beam intensity.
        • Fenix tests the impact resistance
        • Fenix tests the water resistance.
      • Fenix carries out other tests.

           

      Ⅰ. A brief introduction to the ANSI/NEMA FL 1-2009 Standard

      American National Standards Institute (ANSI for short) was established in 1918. It is a non-profit non governmental standards institute.

      ANSI is one of the five permanent members in International Standardization Organization (ISO for short) as well as one of the four permanent members in the

      International Electrotechnical Commission (IEC for short). It takes part in 79% activities of ISO/TC and 89% activities of IEC/TC. ANSI is a member of COPANT and PASC respectively.

      ANSI is the potential national standards institute and actually it has turned into the national standards center. Various standardizing activities have connections with

      it. In the meantime, the ANSI Standard has been voluntarily adopted.

       

      Ⅱ. Why was it created?

      For a long time, there had been no standardised tests or uniform rating systems for consumers to judge flashlight performance. Without any uniform rating systems, it frustrated the manufacturers who were working hard to make high quality lighting tools.

      The establishment of ANSI/NEMA FL 1-2009 Standard allowed consumers to compare flashlight performance. The standard provides a guide for consumers to rate and compare the claims on the packages for each manufacturer’s products.

      Distributors and consumers are more informed. Therefore, it is much easier for them to make the best choices for their needs.

       

      Ⅲ. Who approved the standard?

      American National Standards Institute (ANSI)

      National Electrical Manufactures Association (NEMA)

      Representatives from 14 illuminating companies, such as Princeton, Surefire, Petzl, Streamlight, Black Diamond and Duracell, etc. Representatives from flashlight users and flashaholics

        

      Ⅳ. What does it mean to consumers and distributors?

      The ANSI Standard helps the consumers know about the technical parameters of flashlights quickly which allows them to make a comprehensive comparison of various flashlights.

      It can provide a guide for distributors and end users to know more about the products and make the best choices for their needs. It evens the playing field for those manufacturers that participate. It’s important to know that adherence to these standards and reporting results is strictly voluntary. Many leading flashlight manufacturers are now adopting the standard.

       

      Ⅴ. Description Of Test Conditions

      The testing contents of ANSI Standard include light output, runtime, beam distance, peak beam intensity, impact resistance and water resistance:
       
        

      1. Output:

      A measurement of the total quantity of emitted overall light energy as measured by integrating the entire angular output of the portable light source. Measured in Lumens.

      To measure the quantity of overall light energy emitted by the device.

      Power resource: All tests are conducted with fresh batteries or fully charged batteries. Batteries used shall be of the same type and/or brand as of the product. The batteries recommended by the manufacturer are to be used for testing. .

       

      2. Runtime:

      The duration of time from the initial light output value (that’s 30 seconds after the light is turned on with fresh batteries) until the light output drops to 10% of the initial value.

      To determine the amount of time elapsed under continuous operation at every level.

      Conditions: If the device offers multiple output levels, the runtime will be measured at the maximum level & at every level.

       

      3. Beam Distance:

      The distance from device at which the light beam is 0.25 lux. Results are reported in meters

      To determine the maximum distance at which the devices is capable of producing 0.25 lux of light within 30s to 2 min of operation.

       

      4. Peak Beam Intensity:

      Peak beam intensity is the maximum luminous intensity typically along the central axis of a cone of light. The value is reported in candela and does not change with distance.

      To determine the peak beam intensity, reported in units of candela, of the device’s beam pattern within 30s to 2 min of operation.

       

      5. Impact Resistance:

      The degree to which a portable light resists damage when dropped on a solid surface. Dropped samples must remain fully functional in order to pass the impact resistance test.

      To ensure the structural integrity of hand-held/portable lighting devices under specified impact conditions. The test procedure provide specifications and methods that will ensure products meet a minimum standards of reliability as a result of impact testing.

      Drop test should be a priority to any other reliability tests, shall be 1m minimum.

       

      6. Water Resistance:

      Purpose: The flashlight water resistance can satisfy the lowest requirements for the reliability.

      All test samples shall function normally immediately after the test and 30 min after the test.

      Water Resistance measured in regards to:

      Resistance to Temporary Immersion in Water

      Resistance to Continuous Immersion in Water

      Resistance to Splashing Water

       
       

      Ⅵ. How will Fenix use ANSI?

      1. Fenix will strictly adhere to the ANSI Standard to measure the various fundamental features of its products.
       

      Fenix will spare no efforts to provide more reliable products and perfect services. The consumers can better evaluate, compare and choose their products provided that they know about the output, beam distance, impact resistance, water resistance and the runtime.

      It will adhere to ANSI/NEMA FL1-2009 Standard with all its products.

      In line with the ANSI Standard:

      • Fenix tests the output and runtime.
      • Fenix tests the beam distance.
      • Fenix tests the peak beam intensity.
      • Fenix tests the impact resistance.
      • Fenix tests the water resistance.
       

      2. Fenix carries out other tests:

      Besides the ANSI Standard and to allow for consumers’ various real life usage conditions, Fenix performs other tests set by itself, such as the salt spray test, bending test, vibration test, ultraviolet radiation test, etc. 
      • Shakeout Test: To provide a procedure to determine the scratch-resistant and wear-resistant abilities of the surface of flashlight.
      • Bending Test: Mainly use to test the bending degree and the strength of wires.
      • Salty Spray Test: Mainly use to test the corrosion-resistant ability.
      • Ultraviolet Radiation Test: Mainly use to test the changes of flashlight after it goes through the ultraviolet test.
      • Environmental Test: Includes the high temperature test and low temperature test, which are used to test the high-temperature-resistant and the low-temperature-resistant abilities respectively.
      • Vibration Test: To provide a procedure to determine the anti-vibration ability.
      • Switch Test: To provide a procedure to determine the lifespan of the switch and the resistivity.
      • Temperature Test: To provide a procedure to determine the conditions of the heat generation and the heat dissipation and the relevant temperatures, etc.
       
      3. Fenix has introduced the ANSI Standard to its product packages.
      Fenix now records ANSI test results on its product packaging to allow customers to quickly understand the product capabilities.
       
      4. Fenix has introduced the standard to the product manuals.
      Fenix has made some modifications to its product manuals. The modifications help the consumers to easily identify, compare and rate the flashlights. Fenix will continue to report the ANSI Standard of its later products to meet the international consumer needs.
       
      5. The description of the flashlight tests.
      • All tests are conducted with fresh batteries or fully charged batteries /energy storage devices.
      • 12V DC devices that are only tethered shall be powered with 13.8V DC using a power supply.
      • Peak beam intensity and beam distance are both measured by the same test.
      • To provide a procedure to determine the peak beam intensity, reported in units of candela, of the device at which the light beam is 0.25 lux within 30 seconds to 2 minutes of operation.
      • Batteries used for testing and claim substantiation shall be of the same type and/or brand as those offered for sale with the product.
      • If the product is sold without batteries and a peak beam intensity claim is made, a specific battery type and chemistry shall be recommended with the package.
      • Lab conditions shall be a controlled temperature of 21±2℃ and a relative humidity of 50±40%. The lab environment must minimize any redirecting of light that would affect the measurement outcome.
      • If the device offers multiple focusing or adjustable beam angle, the peak beam intensity will be measured at the maximum level or as otherwise identified.